hot key words：Sprocket，Gear，Chain Coupling
hot key words：Sprocket，Gear，Chain Coupling
Sprockets, chain with a long time after the oil, otherwise not only is not flexible but also easy to rust, but when oil, how oil, the number of oil is also very particular about the grasp of the same will not Sprocket, the chain has a negative effect. Take a look at the right approach.
Once the equipment is running, the industrial sprockets should be on the transmission components sprocket, the chain of oil, but must be clean before, for the wear, sound larger chain, is to add the best oil surface. When oiling, be sure to make sure that the composition of each piece of metal between the workpiece are stained with oil, so we are one by one to the chain of the pin on both sides of the drop of oil.
If the lazy oil bottle directly down, then, not only poor control of oil, the effect is not very good. It is best to use a syringe to drop the oil on both sides of the chain, each time you can lower the 2-3 drops, and then place a few minutes so that all the oil infiltration.
